Products description
Please contact for advice on this mount. So you can benefit from our experience before buying.
With each mount, the bearing clearance is checked and adjusted!
iOptron iEQ45 Pro parallactic GoTo mount with 122cm column
Stable parallactic mount with accurate tracking for astrophotography, with GoTo and GPS.
♦ German mount with GoTo
♦ 20 kg payload with 11.4 kg weight, optimum ratio of dead weight to carrying capacity
♦ High quality column - ideal for long refracting telescopes and for fixed installation
♦ Stepper motor drive with microsteps and PEC
♦ Up to 5.83 ° / sec swing speed
♦ Up to 15 ° after meridian without stop possible
♦ 358000 objects in the database, heated hand box
♦ ASCOM and autoguider interfaces
♦ Universal design for 12 volts
♦ Universal prism clamps (Vixen, Losmandy)
The new iEQ45 Pro is an excellent German mount for astrophotographers.
With its GPS-based AccuAlign system, it enables fast deployment and has a high load capacity for its weight.
iOptron has changed and improved the original iEQ45 Pro:
♦ Stepper motor instead of servomotor
♦ Greater transmission ratio
♦ Some "cosmetic" improvements
Some features:
♦ Load capacity 20 kg
♦ Net weight 11.4 kg
♦ Transportable and stable German mount
♦ autoguider interface, ST4 compatible
♦ Correction of the periodic screw error remains (PPEC)
♦ temperature-compensated tracking speed
♦ 32-channel GPS
♦ heated hand box with GOTONOVA technology
♦ cold-resistant to -20 ° C
♦ RS232 for ASCOM control and firmware update
♦ Position accuracy 0.09 arc seconds
♦ Dual standard prism clamp for vixen and losmandy
♦ Column 122 cm for fixed exhibition and transport with three outriggers
♦ Leg spreader made of die-cast aluminum
♦ illuminated pole finder
♦ important accessories included
Mount type: parallactic mount
Type: German mount
Maximum payload: 20 kg
Net weight of mounting head: 11.4 kg
Altitude range: 5 ° -70 °
Hour axis: Steel, 50 mm diameter
Declination axis: steel, 40 mm diameter
Material worm wheels: aluminum
Material snails: brass
Counterweight rod: stainless steel, 28 mm diameter
Counterweights: 2 pieces 5 kg
Prism Clamp: Vixen and Losmandy standard
Polsucher: illuminated
Circular level: available
Column: 107 cm column with three outriggers
Leg diameter; Columns on request:
Motor: 1.8 ° stepper motor, 128 microsteps
Angular resolution: 0.09 arc seconds
PEC: permanent
Maximum swivel rate: 5.83 ° / sec
Tracking speeds: Sidereal, Sun, Moon, King, Custom
Frequency base: temperature compensated quartz
Meridian treatment: Stop after 0-15 °, Autoflip
Handbox display: 8 lines, 21 characters; heated
Number of objects: about 358000
GPS: built-in, 32-channel
Data transmission: RS232
Protocol: ASCOM
Autoguiderschnittstelle: ST4
Power supply: 12 V DC (11-15 V), 2 A
Power consumption: 0.45 A tracking, 0.75 A positioning
Resumption of the function after power failure: yes
Cold-resistant: down to -20 ° C
♦ mounting head
♦ pillar
♦ 2 counterweights with 5 kg each
♦ Hand controller (with cable)
♦ AC adapter
♦ 12V cigarette lighter adapter
♦ RS232-RJ9 cable