ATR3CMOS series adopts SONY Exmor, Exmor R or Exmor RS CMOS sensor as the image-picking device with two-stage peltier cooling system. This will greatly increase the signal to noise ratio and decrease the image noise. Besides, smart internal heat transfer structure is used to transfer the heat radiation. Electric fan is used to increase the heat radiation power. USB3.0 is used as the data transfer interface.
ATR3CMOS series comes with advanced video & image processing application ToupSky; providing Windows/Linux/ macOS/ Android multiple platform SDK(Native C/C++, C#/VB.NET, Python, Java, DirectShow, Twain, etc);
The ATR3CMOS series can be widely used in low light environment capture and analysis, as well as the astronomy application.
Sensor | Sony IMX183(M) | |
Diagonal | 1 “ | |
Image Area | 13.056 mm x 8.755 mm | |
Resolution | 20 MP (5440x3648) | |
Pixel size | 2.4 µm x 2.4 µm | |
Spectral Range | 380-690nm (with IR-cut Filter) | |
White balance | ROI White Balance/ Manual Temp Tint Adjustment/NA for Monochromatic Sensor | |
Cooling: | - Two-stage TE-cooling System -42 °C below Ambient Temperature | |
Sensitivity | The sensor G sensitivity of ATR3CMOS10300KPA is 388.0 mV with 1/30s. The sensitivity is measured with a testing standard lens with CM500S (t = 1.0 mm) as an IR-cut filter and image at F8.0. If the image is measured at F5.6, the result could have been 2 times of the current value. | |
Dark signal | 0.21 mV with 1/30s | |
Binning | 1x1, 2x2, 3x3 | |
Max FPS at Resolution (USB 3.0) | 17.8@5440x3648 41@4096x2160 51@2736x1824 64@1824x1216 | |
Shutter-Typ | Rolling Shutter | |
Exposure | 0.1ms~3600s | |
Gain | 1x - 160x | |
DDR3 Buffer | 512MB (4Gb) | |
Connection Port | USB3.0/USB2.0 | |
Capture/Control SDK | Windows/Linux/macOS/Android Multiple Platform SDK(Native C/C++, C#/VB.NET, Python, Java, DirectShow, Twain, etc.) | |
Camera Dimensions | Diameter 80 mm * Height 103 mm | |
Camera Weight | 0.552 kg | |
Back Focus Distance | 17.5mm | |
Amp glow | no amp glow | |
Power: | 12 V, 3 A | |
Connector | M42x0,75f | |
Advantages | - Support low noise mode/ high frame rate mode - Hardware ROI - Support HCG mode/ LCG mode - Zero Amp glow - Sensor tilt adjustment - M54 x 0.75 mount - Native ASCOM/WDM driver for easy connection with 3rd party astrophotography software - ToupSky for Microsoft® Windows® XP / Vista / 7 / 8 /10 (32 & 64 bit), OSx(Mac OS X), Linux - Windows/Linux/macOS/Android Multiple Platform SDK(Native C/C++, C#/VB.NET, Python, Java, DirectShow, Twain, etc.) |
The ATR3CMOS camera body, made from tough, alloy, ensures a heavy duty, workhorse solution. The camera is designed with high quality IR-CUT to protect the camera sensor and block the IR light. No moving parts included. These measures ensure a rugged, robust solution with an increased lifespan when compared to other industrial camera solutions.
| |
A | Carton L:50cm W:30cm H:30cm (20pcs, 12~17Kg/ carton, 0.045m3), not shown in the photo |
B | 3-A safety equipment case: L:28cm W:23cm H:15cm (1pcs, 3.9Kg/ box); carton size: L:28.2cm W:16.7cm H:25.5cm(TBD) |
C | ATR3CMOS series camera (M42x0.75 Mount+2” adapter) |
D | Power adapter: input: AC 100~240V 50Hz/60Hz, output: DC 12V 3A |
E | High-Speed USB3.0 A male to B male gold-plated connectors cable /1.5m |
F | Drying tube |
G | CD (Driver & utilities software, Ø12cm) |
Optional Accessories | |
H | M42x0.75(Camera) to C-mount adapter(Part Number: 208009) |
I | M42X0.75(camera) to 1.25”(telescope) adapter(Part Number:208004) |
J | M42x0.75(Camera) to 2”(telescope) adapter(Part Number: 208005) |
From Left to right
a)ATR3CMOS camera with M42x0.75 mount;
b) ATR3CMOS camera+ M42x0.75(Camera) to C-mount adapter;
c) ATR3CMOS camera+ M42X0.75(camera) to 1.25”(telescope) adapter;
d) ATR3CMOS camera+ M42X0.75(camera) to 2”(telescope) adapter s
1 Protective window, AR window for mono camera, IR-cut filter for color camera
2 M42F x 0.75 thread
3 Air inlet
4 Thermo outlet
5 USB 2.0 HUB
6 USB 3.0/ USB 2.0 port
7 DC 12V 3A power port, 5.5 x 2.1mm
8 LED indicators: 1) Power LED. 2) System LED. 3)TEC LED. 4)Fan LED
The ATR3CMOS20000KPA can be connected to a telescope with proper adapter, or the camera lens. The most common adapters are already included in the package, but we also provide some specific adaptors based on the requirement.
The female flange to the sensor is 17.5mm. The ATR3CMOS20000KPA comes with M42x0.75 mount and can connect to telescope with the M42x0.75 thread in a direct way.
The ATR3CMOS20000KPA can also connect to the telescope who use 1.25” or 2” eyepieces by M42M-1.25” or M42M- 2” adapter.
1 Nikon-M42 adapter
2 EOS-M42 adapter
3 Nikon lens
4 Canon lens
5 ATR3CMOS camera with M42Fx0.75 mount
On the back side, there are 3 connection ports: DC 12V/3A power port, USB3.0/ USB2.0 port and USB-HUB.
Due to the significantly larger power consumption of IMX183, ATR3CMOS20000KPA (including the cooling system) is now booted up only by 12V/3A power supply. USB3.0 no longer workds as a power source but only as a data communication method. The USB-HUB provides connection with other devices, which allows user to avoid the mess of cable management. Once another device is connected through the USB-HUB, it will be connected to PC device through the USB3.0/USB2.0 port.
Installing the application
For the software, you can visit the software website: https//touptek.com/download/ to download the latest ToupSky. The ATR3CMOS can also be used with ASCOM and DirectShow SDK. If the third-party software is compatible with these SDKs, customers can also download the software drivers from our website and install the drivers into the third-party software.