With full frame sensor, precise temperature regulation, ultra-low readout noise and zero amp-glow, The SkyEye62AM camera is mainly used for deep sky photo shooting. Its extraordinary performance and extensive usage will give you great astrophotography experience
Professional deep-sky astrophotography: The Volfformat sensor is perfectly suited for spread out nebulae, star fields or the lunar surface. This sensor is larger than the APS-C sensors installed in most DSRL cameras and has an area of 24 mm x 36 mm (as in analogue 35 mm cameras).
Thermoelectric cooling: The Peltier cooling system reduces image noise. Noise caused by dark current has almost completely disappeared at up to 35°C below ambient temperature. In addition, the exact control of the sensor temperature is very helpful for calibrating the astrophotos with dark frames: they can all be taken at the correct temperature. The low-noise images show more details and require less post-processing.
USB hub: Via two additional USB 2.0 ports on the back of the camera, additional devices (for example a guiding camera) can easily be connected to this hub. An additional cable connection from your PC to each individual device is therefore not necessary.
Connection: The camera can be adapted to almost any telescope - with an M54x0.75(f) thread and the back focus of 17.5 mm. M48x0.75(f) adapters and an extension for the usual 55mm backfocus are also included. A T2 adapter ring completes the connection options. The 2" outer diameter of the adapters allows of course a telescope connection like any standard 2" eyepiece.
The supplied robust case is filled with foam. Thus the camera is very well protected during any transport. If the camera should ever be separated from the telescope again.
Transmission: A filter protects the sensor chamber from dust and moisture. The Topuptek colour CMOS cameras are equipped with an infrared blocking filter. CMOS sensors are also sensitive to incident infrared light, making correct colour reproduction impossible. In contrast, Topuptek mono CMOS cameras have an anit-reflective protective glass that transmits ultraviolet and infrared light in addition to visible light. This allows complete control over the transmission curve through the use of additional filters - a prerequisite for advanced photographic or photometric applications.
Practical camera software: The downloadable ToupSky software enables uncomplicated and comprehensive camera control. ToupSky allows full control over all essential parameters - without an overburdening interface. The software is compatible with Windows 8/10/11.
Compatibility: Touptek cameras can be controlled by a wide range of recording software via the common ASCOM and INDI interfaces as well as AStro Dshow drivers. Native compatibility with a growing number is available with popular programs such as PHD2 and N.I.N.A.
Sensor: | Sony CMOS IMX455 Mono | |
Diagonal | 43.3 mm | |
Sensor size | 35.976 mm x 23.989 mm | |
resolution | 61 mega pixels, 9568 x 6380 | |
pixel size: | 3.76 µm x 3.76 µm | |
Spectral range | AR protective glass | |
ADC: | 16 bit native | |
Cooling: | Leistungsstarke Peltierkühlung - Two-stage TE-cooling System 30-35 °C below Ambient Temperature - 35 K below ambient under short exposure - 35 K under long exposure time (> 1s) | |
Heating | - integrierte Heizung gegen Kondensation - die Sensorkammer ist luftdicht versiegelt - in der Sensorkammer befinden sich Trocknungsmittel | |
Empfindlichkeit | The sensor sensitivity of SkyEye62AM is 435.5mV. The sensitivity is measured with a testing standard lens with CM500S (t = 1.0 mm) as an IR-cut filter and image at F8.0. If the image is measured at F5.6, the result could have been 2 times of the current value. | |
Dark signal | 0.039mv with 1/30s | |
Binning | 1x1, 2x2, 3x3 | |
Max FPS at Resolution (USB 3.0) | 16 bit | 8 bit |
3.1 FPS @ 9568*6380 9.4 FPS @ 4784*3190 27.8 FPS @ 3184*2124 | 6.2 FPS @ 9568*6380 18.8 FPS @ 4784*3190 55 FPS @ 3184*2124 | |
Max FPS at Resolution (Low Noise, USB 3.0,) | 16 bit | 8 bit |
1.9 FPS @ 9568*6380 (Low Noise Mode is only available in All Pixel Readout Mode) | 6.2 FPS @ 9568*6380 (Low Noise Mode is only available in All Pixel Readout Mode) | |
Max FPS at Resolution (USB 2.0) | 16 bit | 8 bit |
0.4 FPS @ 9568*6380 1.5 FPS @ 4784*3190 3.3 FPS @ 3184*2124 | 0.7 FPS @ 9568*6380 2.9 FPS @ 4784*3190 6.6 FPS @ 3184*2124 | |
Max FPS at Resolution (Low Noise, USB 2.0) | 16 bit | 8 bit |
0.3 FPS @ 9568*6380 (Low Noise Mode is only available in All Pixel Readout Mode)
| 1.2 FPS @ 9568*6380 (Low Noise Mode is only available in All Pixel Readout Mode)
| |
Shutter-Typ | Rolling Shutter | |
Exposure | 0.1ms~3600s | |
Gain | 1x - 150x | |
SNR | 47.1 dB | |
Dynamic Range | 88.3 dB (Low Noise Mode) | |
Read Noise | 2.8 - 0.9 e- | |
Read Noise (Low Noise Model) | 1.95 – 0.9 e- | |
Read Noise (LCG) | 4.29 – 1.47 e- | |
QE Peak | >80% | |
Full Well | 51ke- (111ke- @LCG) | |
ADC | 16bit | |
DDR3 Buffer | 512MB (4Gb) | |
Connection Port | USB3.0/USB2.0 | |
Protect Windows | AR protective window | |
Spectral Range | 380-690nm (with IR-cut Filter) | |
Capture/Control SDK | Windows/Linux/macOS/Android Multiple Platform SDK(Native C/C++, C#/VB.NET, Python, Java, DirectShow, Twain, etc.) | |
Camera Dimensions | Diameter 89 * Height 103 (mm) | |
Camera Weight | 0.718kg | |
Back Focus Distance | 17.5mm | |
Cooling: | Two stage TEC Peltierelement | |
Effective Cooling Temp: | -30°C below ambient under short exposure/ -35°C under long exposure (> 1s) | |
Supported OS | Microsoft® Windows® XP / Vista / 7 / 8 /10 (32 & 64 bit) OSx(Mac OS X) | |
Amp glow | no amp glow | |
Strombedarf: | 12 V, 3 A | |
Teleskopanschluss: | M54x0,75 Innengewinde | |
Arbeitsabstand vom Innengewinde zum Sensor: | 17,5 mm | |
Besonderheiten | - Support low noise mode/ high frame rate mode - Hardware ROI - Support HCG mode/ LCG mode - Zero Amp glow - Sensor tilt adjustment - M54 x 0.75 mount - Native ASCOM/WDM driver for easy connection with 3rd party astrophotography software - ToupSky for Microsoft® Windows® XP / Vista / 7 / 8 /10 (32 & 64 bit), OSx(Mac OS X), Linux - Windows/Linux/macOS/Android Multiple Platform SDK(Native C/C++, C#/VB.NET, Python, Java, DirectShow, Twain, etc.) |
The SkyEye62AM has built in 16bit ADC. It also has 12bit output mode for hardware binning and smaller resolution. The camera also supports hardware ROI, and the smaller the ROI size is, the faster frame rate is.
SkyEye62AM supports HCG and LCG mode switch. Under LCG mode, the full well can reach 111ke-.
The SkyEye62AM has been carefully designed and is able to achieve zero amp-glow photo shooting. Figure 3 and Figure 4 show the different cameras at 20C and 5-minute exposure time with and without amp-glow. One can find that SkyEye62AM camera captured image has zero amp-glow.
The SkyEye62AM can be connected to a telescope with proper adapter, or the camera lens. The most common adapters are already included in the package, but we also provide some specific adaptors based on the requirement.
The female flange to the sensor is 17.5mm. User can make it to 55mm back focus distance with the 21mm and 16.5mm extender included in the camera package. Please check Figure 10 for details.