ZWO MONO cooled astro camera ASI 183 MM Pro sensor D = 15.9 mm

One of the most sensitive cooled astro cameras on the market with a QE of up to 84% and nearly 20 million pixels for all astronomical applications.
♦ Sensor SONY Exmor CMOS IMX183CLK-J / CQJ-J 13.2 x 8.8 mm sensor, 15.9 mm diagonal - monochrome

♦ 5496 x 3672 pixels - 20.18 MP

♦ Very high resolution with 2.4 μm pixel size

♦ DDR memory buffer 256 MB - buffer for a more stable data transport - prevents amplifier annealing even with USB2.0 (characteristics of the new PRO versions)

♦ Improved enclosure with controlled cooling up to 45 ° C below ambient temperature without dew and icing problems even at higher humidity. Incl. Chamber for desiccant.

♦ Short download time through USB 3.0 - can also be used with USB 2.0

♦ AR protection filter installed - full passage also in the infrared

♦ Connectors: T2, 1.25 "and 2" available

♦ Extra screwed front panel ?? now the camera body can no longer be mistaken ?? be screwed on

♦ Extremely high sensitivity, the QE is up to 84%. After just a few seconds you have displayed weak galaxies and nebulae.

♦ USB2.0 connection for filter wheels, autoguider or USB focuser

♦ Extensive scope of delivery

ZWO ASI183MM Pro - cooled black and white CMOS camera for astrophotography
The refrigerated ZWOptical ASI183MM incorporates the state-of-the-art SONY Exmor R BSI IMX183 monochrome sensor. With about 20 million pixels, this camera is one of the big CMOS astro cameras. The resolution of the camera is sensational due to the pixel size of only 2.4 μm. This makes the ASI183 particularly interesting for sharp and bright telescopes and camera lenses.

One of the outstanding features of the ASI183 is its extreme light sensitivity. The QE of 84% through the BACK ILLUMINATION technology and the very low amplification annealing make the camera very well suited for all astronomical applications, but especially for deep-sky astrophotography.

The monochrome camera is more sensitive than the Color version due to the absence of the Bayer matrix. With L-RGB filters you can still create fascinating color shots of the universe. We recommend SW cameras especially in light-polluted skies, for example near cities. With suitable filters, for example fog filters, you can select the light of deep-sky objects very well. Matching filter wheels can be found in the accessories recommendations.

Further advantages and product features of the ASI 183MM Pro monochrome camera:

♦ USB 3.0 for a quick download - can also be operated with USB 2.0
♦ DDR memory buffer 256 MB for stable data transfer with USB2.0 - prevents amplifier glowing.
♦ Powerful Peltier cooling up to 45 ° C under ambient conditions
♦ One of the most sensitive 15.9mm diameter CMOS sensors in the world - 20 megapixels
♦ High resolution with 2.4 μm pixels - ideal for high-speed and sharp telescopes, such as Apos, Hyperstar, Celestron Faststar, high-intensity Newton telescopes ...
♦ Supplied with AR clear glass filter - full passage also in the infrared. If the IR is to be blocked, an IR cut filter is needed.
♦ Distance T2 connection thread (internal thread) to the camera sensor: 17.5 mm
♦ High sensitivity - QE over 84% - ideal astronomy camera for faint objects
♦ 12-bit ADC

Application areas of the camera:

♦ Deep Sky images (nebulae and galaxies): Due to the high sensitivity, nebulae and galaxies are imaged after only a few seconds. The camera can be cooled to up to 45 ° C under ambient conditions. As a result, the already low noise is further reduced. By raising the GAIN (comparable to the ISO setting for digital SLR cameras), you can reduce exposure times to less than 30 seconds. Effects due to air turbulence or inaccuracies of tracking are thus switched off.

♦ Moon and planetary images: Extremely short exposure times due to high sensitivity freeze the air turbulence. Due to the high resolution of the sensor many details can be reproduced even with a shorter telescope focal length. Video astronomy is also possible.

Optimal support before and after your purchase
We work with the cameras ourselves and can offer you optimal advice. Which camera fits your telescope, how do you achieve the optimal adaptation? We also offer the best possible service after the purchase.

Downloads, Drivers:
ZW Optical provides software and drivers online for free download.

Software and drivers for all ZWO cameras
Sensor: 1 "CMOS CMOS IMX183CLK-J / CQJ-J
Resolution: 20.18 megapixels, 5496 * 3672
Pixel size: 2.4 μm
Sensor size: 15.9 mm diameter
Exposure time: 32 μs to any desired
Readout noise: 1.6 e- @ 30 dB gain
Full well: 15 ke
Quantum efficiency maximum: approx. 84%
Cooling: Peltier cooling up to 45 ° C under ambient conditions
Software requirement: USB3.0 and USB2.0
DDRIII buffer: 256 MB
Bit rate: 12 bit output (12 bit ADC)
Telescopic connection: T2, 2 "and 1.25"
T2 thread to sensor distance: 17.5 mm (6.5 mm without adapter)
Size: 78 mm in diameter and 86 mm in length
Weight: 410 grams

♦ ASI camera cooled
♦ desiccant tablets
♦ T2 extension (21 mm long)
♦ T2 extension (16.5 mm long)
♦ Adapter to 1.25 "with filter thread and cap
♦ Flat adapter T2 to 1.25 "
♦ M42-M48 adapter
♦ 2 spacer rings
♦ Quick Start Guide
♦ USB3.0 cable, long
♦ 2 USB2.0 cables, short
♦ camera bag