Celestron StarSense AutoAlign for Skywatcher mounts

Automatic alignment with highest accuracy without locating reference stars - now also for Skywatcher GoTo mounts.

♦ With this StarSense module, you can automatise the alignment process (calibration at the night skyl) of your Skywatcher mount.

♦ StarSense will automatically align your telescope, so you can begin observing in minutes.

♦ StarSense replaces the original Skywatcher hand control - you can equip your Skywatcher GoTo mount with the proven Celestron control.

♦ The kit consists of three parts: StarSense camera with mounting bracket, StarSense interface box and Celestron GoTo hand control


 

Celestron StarSense - fully automated calibration of your Skywatcher GoTo mount

StarSense technology was innovated by Celestron’s engineers, allowing a Celestron computerized telescope to automatically align itself with the night sky. Alignment has never been easier, the inconvenient locating of reference stars can be omitted! This technology was introduced with the SkyProdigy mounts first and has received much attention from owners of other telescopes; a short time later it could be retrofitted for all modern Celestron mounts with NexStar control by adding the StarSense module.

In order to make this luxury available to owners of mounts with more simple controls, Celestron has made StarSense and the integrated plate solver technology even more versatile. With the new interface box, you can replace the SynScan control from Sky-Watcher telescopes by the Celestron StarSense control and get the easy operation of Celestron without buying a new mount.

With this interface box, StarSense can be used also with Sky-Watcher telescopes, further expanding the number of scopes that can take advantage of this technology!

How it works: StarSense camera and hand control both plug into the Interface Box and the Interface Box plugs into the mount’s hand control port. In minutes your SkyWatcher mount is aligned and you are off to the stars.
 

This Celestron StarSense module is compatible with:

♦ Skywatcher HEQ5 SynScan / SkyScan
♦ Skywatcher EQ5 SynScan (V4 and up)
♦ Skywatcher EQ6 SynScan / SkyScan and SynTrek
♦ Skywatcher AZ-EQ5 und AZ-EQ6
♦ Skywatcher EQ8
♦ Altazimuth GoTo mounts from Skywatcher, if compatible to AZ SynScan
♦ Orion SkyView Pro #24709
♦ Orion Atlas EQ-G #24338
♦ Orion Atlas Pro AZ/EQ-G #10010
♦ Orion HDX110 #10044

 

Compatible with:

Skywatcher and Orion USA GoTo mounts

In the box:
♦ StarSense Celestron GoTo hand control
♦ StarSense camera with large and small mounting brackets
♦ Cable from camera to mount
♦ Interface box - attaches to a tripod leg