Please contact for advice on this mount. So you can benefit from our experience before buying.

With each mount, the bearing clearance is checked and adjusted!
 

iOptron CEM120 - Center Balanced GoTo mount with encoder - 52kg carrying power

The GoTo Mount # 7301 - CEM120-EC is a high quality mount for astrophotography with high precision encoders and real-time PEC.
♦ payload telescopes up to 52 kg weight

♦ Weight of axles 26 kg

♦ Pole height from 0 ° equator to 68 ° north and south latitude

♦ Go2Nova V2 controller with Advanced GoTo technology

♦ High quality stepper motors with 0.07 "accuracy

♦ Electronic Einnordungshilfe even without a view of the Polarstern

♦ Periodic error below 0.5 arc seconds RMS by encoder.

♦ GPS, WiFi and LAN for remote operation are built-in

♦ ST-4 autoguiding interface for astrophotography is built-in

♦ Telescopic attachment via Losmandy Level quick coupling

♦ Tripod connection ident with iEQ45 and CEM60

iOptron CEM120 GoTo mount for telescopes up to 52kg weight with encoder
iOptron continues the proven center-balanced mounting concept with the CEM120 GoTo mount. With a weight of only 26 kg (axbox), the mount can be loaded with telescopes and accessories weighing up to 52 kg (without counterweights). The mount is more compact than conventional parallactic mounts. This allows better leverage and better carrying power.

The mount has been specially designed for astrophotography with large telescopes up to 20 "opening, providing a very accurate and even tracking, and the mount is already prepared for remote operation.

In contrast to the CEM120, the CEM120-EC has high-precision encoders which push the periodic error down to less than 0.5 arc seconds via a real-time PC.

The advantages and features of the # 7300 CEM 120 GoTo mount

♦ New center-balanced mount concept for more rigidity and less vibration.
♦ Designed for astrophotography, but also very suitable for observations.
♦ Carries accessories up to 52 kg (+ counterweights) at a moderate weight of 26 kg (axbox)
♦ Range of application from the equator to about 70 ° north and south latitude
♦ Micro adjustment for height and azimuth
♦ High precision stepper motors with 0.07 "accuracy for accurate positioning and tracking
♦ Go2Nova® 8407 V2 controller with latest GoTo technology
♦ High precision encoder
♦ Per screw error less than 0.5 arc seconds
♦ Built-in 32-channel Global Positioning System - GPS
♦ WiFi and Lan for remote operation are built-in
♦ ST-4 autoguiding interface is built-in
♦ Quick Coupler for Telescopes - Losmandy Level - is installed

Mounting Type: Center-Balanced Parallactic Mount CEM
Payload weight: 52 kg (without counterweights)
Weight axbox: 26 kg
Auger rotation: every 240 seconds
RA worm wheel: D = 216 mm, 360 teeth
Dek worm wheel: D = 216 mm, 360 teeth
Diameter of the screws: 26 mm
Diameter of the RA axis: 80 mm - stainless steel
Diameter of Dek axis: 80 mm - stainless steel
Counterweight rod: Diameter 38.1 mm Length 540 mm insertable
Mount base: 210x230 mm flat bearing surface
Motors: stepper motors
Encoder: High precision encoder
Max. Adjustment speed: 4 ° per second
Hand controller: Go2Nova® 8407 V2, 8 line 21 character LCD
Power supply: 12 V DC - 5 A

♦ CEM120 axbox
♦ Go2Nova 8407 V2 hand controller
♦ 2x 10 kg counterweight
♦ Counterweight bar
♦ Cable hand controller
♦ Serial # 8412 cable