TS 1.25" / 2" Newton alignment laser M28 and M48 screw adaptation

The collimation laser is extremely precise and offers 1.25" and 2" plug-in sleeves as well as M28 and M48 threaded connections for perfect centering.

♦ Plug-in connections on the telescope side: 1.25" and 2" (without locking groove)

♦ Threaded connections on the telescope side: M28.6 internal thread on the laser and M48x0.75 internal thread via screw adapter

♦ Large on and off button on the top of the laser

♦ Robust metal processing for high accuracy and durability

♦ The laser can be adjusted using grub screws

♦ 45° viewing allows a complete check of the collimation from the eyepiece extension

♦ The laser requires a CR2032 lithium battery (optional) to operate

TS laser collimator for Newtonian telescopes with screw option
With this adjustment laser, you can collimate your Newtonian telescope in just a few minutes. A reliable check of the collimation only takes a few seconds. This means that you can be sure that you have a well-adjusted and powerful telescope before every observation or photo session. The adjustment laser can be connected to 1.25" or 2" eyepiece extensions without an additional adapter. However, it also offers the option of screwing.

The advantage of a screw solution on the eyepiece extension

With simple 1.25" or 2" clamps on the eyepiece extension, the laser can tilt slightly and thus endanger optimal adjustment success. The SKLAM482 offers a safe and precise screw adaptation.

There is an M28 internal thread on the base of the laser housing. An extension adapter to M48x0.75 filter thread is also included in the delivery. Many eyepiece extensions or correctors have this thread on the camera side. The laser can therefore be screwed directly onto the extension.

We also offer a suitable adapter in the accessories section for eyepiece extensions with the T2 external thread. Using thread adapters, you can connect the alignment laser to all common eyepiece extensions without jamming. This allows you to achieve a very high and reproducible alignment accuracy.

Type: Newton alignment laser
Color of the diode: red
Power: 1 mW
Battery required: CR2032 (not included)
Housing material: black anodized aluminum
Side view: reticle with centering markings
Laser diode adjustable: yes
Plug-in connections on the telescope side: 1.25" and 2"
Threaded connections on the telescope side: M28.6 internal thread and M48x0.75 internal thread
Laser length: 125 mm

♦ Alignment laser
♦ Extension adapter from M28 to M48
♦ 2" plug-in sleeve with M48 connection