Products description
TS-Optics anti-reflective paint - matt black 150 ml
The anti-reflective color from TS-Optics offers absolute black and avoids reflections. It is ideal for blacking out telescopes or adapters.
♦ Suitable for telescopes, camera lenses, adapters, etc.
♦ Also suitable for occasional wet conditions (dew)
♦ After drying, a deep black, matt and rough surface is created
♦ Easy application with a brush
♦ The color lasts on all common surfaces (paint, carbon, multiplex, metal ...)
♦ The paint can be diluted with water, then it is optimally prepared for processing. You can extend the color with up to 40% water.
♦ 150 ml of TS anti-reflective paint result in 210 mm of ready-to-use paint
♦ The anti-reflective paint is darker than blackboard paint, for example
♦ Warning! Cannot be shipped by air due to security restrictions!
TS-Optics anti-reflective paint - deep black
The ultra-matt black acrylic paint is suitable for light outdoor use, so occasional moisture. It sticks to all paint surfaces and can be applied with a brush or spray. The color lasts on rough and smooth surfaces, such as aluminum or carbon. You can also paint over existing blackened areas. Please make sure that the original paint adheres well. The consumption is slightly higher on rough surfaces, but the surface appears even darker.
The 150 ml container is more than enough to paint a large amateur telescope (up to 10" F5) from the inside. It is very easy to use. We recommend diluting it with water at a ratio of 1:1. The surface remains the same matt black as with undiluted paint.
Application tips for TS-Optics anti-reflective paint:
♦ It is best to apply the paint with a brush or with a spray gun (for larger areas). One roll uses too much paint.
♦ In the case of Newtonians that have already been varnished (e.g. Skywatcher or GSO), we recommend roughening the varnish with a little sandpaper, which improves adhesion.
♦ The darkening effect lies somewhere between conventional blackboard paint and velor film.
♦ The color is also well suited for the back of secondary mirrors or for secondary mirror spiders and mirror holders.
♦ The color is the main advantage when the light falls at an angle. The color absorbs the light almost completely at flat angles. The result will be a deep black tube with no reflections.
♦ The anti-reflective paint is comparable to wall paint in terms of consistency and dilutability.
More info and tips
♦ TSBlack consists of a special acrylic copolymer, which can absorb more pigments than other acrylic paints.
♦ Binders provide better adhesion to surfaces.
♦ TSBlack is completely vegan and contains no animal ingredients
♦ TSBlack is non-toxic and can also be used indoors
♦ TSBlack can be diluted with up to 40% water. 100 ml TSBlack then gives 140 ml ready-to-use solution. We recommend thinning, especially if the paint is to be sprayed.
♦ TSBlack is not suitable for parts that can heat up to over 100 °C.
♦ While TSBlack is non-toxic, we do not recommend the color as a body paint. If any color gets on your skin, simply wash it off.
Container size: 150 ml
Ingredients: acrylic copolymer, binder for better surface adhesion
This color is identical to Black 3.0 - the world's blackest black acrylic paint 150ml