TS-Optics adapter from M48 thread to MFT Micro Four Thirds bayonet (Panasonic, Olympus)

The adapter from M48 to the Micro 4/3 bayonet enables a direct connection to the M48 filter thread without the T2 bottleneck.

Connection thread lens side: M48x0.75 internal thread

Camera side connection thread: Micro Four Thirds bayonet

Optical path 28 mm - this means the sensor comes exactly 55 mm to the M48 thread

 
TS M48 adapter for Micro 43 bayonet
With this adapter ring you can adapt cameras with a Micro Four Thirds bayonet to adapters and correctors with an M48x0.75 thread connection.

You get exactly 55 mm working distance from the M48 thread to the camera sensor. This is the optimal distance for many correctors and flatteners.

This adapter is suitable for the following camera models, among others:
 Panasonic Lumix DMC models
 Olympus PEN models
 Olympus OM-D E M1, M5, M10

Direct 2" port with full opening without T2 bottleneck:
With the 2" extension sleeve TSVF230 you can adapt the T-ring directly to a 2" socket without the bottleneck via T2. Of course, the TSVF230 again offers the 2" filter screw-in thread on the bottom.

This allows you to attach your DSLR camera directly to 2" connections and has full illumination even for full-format cameras. You can find the 2" extension sleeve further down under the "Accessories recommendations".
 
Connection to correctors with the T2 thread:

The TST2-M48S adapter reduces the M48 internal thread to T2 without an optical path. This means you can also use the adapter for correctors with a T2 (M42x0.75) connection.


 
Connection lens side: M48x0.75 internal thread
Camera side connection: Micro Four Thirds bayonet
Optical length of the bayonet adapter: 28 mm