ZWO Off Axis Guider for Astrophotography - many accessory parts

The ZWO off-axis guider allows photography and guiding with the same telescope.

♦ Optical path only 16.5 mm

♦ Large 8x8 mm prism

♦ Flexible connection to the telescope via M48x0.75 or T2-thread (adapter to T2 supplied)

♦ Connection at the camera side via T2 or M48x0.75 thread (two adapters supplied)

♦ Autoguider connection possible via T2 or 1.25" (adapter to 1.25" supplied)


 

ZWO Off-axis Guider for Astrophotography - with extensive accessories

The off-axis guider from ZWO allows photography and guiding with the only one telescope. It is perfectly matched to the cameras from ZWO. With its extensive adapter package, the off-axis guider can be used with almost all telescopes and combined with all popular cameras.

 

Extensive scope of supply:

♦ OAG body with 1.25″ holder and 5 mm extender for guiding camera (both mounted)

♦ T2 adapter for main imaging camera

♦ M48 adapter for main imaging camera

♦ M48-M42 adapter for telescope or flattener

♦ Hexagon wrench


 

Sample application for a working distance of exactly 55 mm and a ZWO camera with 17.5 mm working distance:

This working distance is required by most field correctors, reducers or coma correctors. The required additional parts are linked in the accessories section.

♦ T2 or M48 fine tuning ring with 1 mm thickness (depending on the connecting thread of the corrector)
♦ ZWO off-axis guider with 16.5 mm thickness
♦ T2 extension 20 mm
♦ ZWO camera with 17.5 mm working distance (or a similar type)

Via flexible T2 adapter rings, you can well compensate the varying working distances of different CCD cameras.

♦ Via the T2 connector at the side and with the 5 mm T2 extension, you can directly focus uncooled ZWO guiding cameras, but also other autoguiders like the M-Gen. With the 1.25" adapter, you can connect autoguiders like Lodestar or the TSGM120M autoguider.

 

Connection at telescope side:	T2 (M42x0.75) and 2" filter thread (M48x0.75) - (female)
Connection at camera side:	T2 and M48 thread (male)
Optical path:	16.5 mm
Connection guiding camera:	T2 thread (male) and 1.25" receptacle

in the box:
♦ OAG body with 1.25″ holder, 5 mm extender (both mounted)
♦ T2 (M42x0.75) adapter for imaging camera (mounted)
♦ M48 adapter for main imaging camera
♦ M48-M42 adapter for telescope
♦ Hexagon wrench