♦ Illumination and correction up to 42 mm sensor diameter - can be used up to full frame size
♦ Telescope connection via M63x1 thread - Adapters to other connections, like M68x1, are available
♦ Camera connection via M48x0.75 thread
♦ Filter thread for 2" filter available, if you unscrew the camera adapter
♦ The working distance can be adjusted to the millimeter via an integrated adjustment - a complicated adapter battle is not necessary
♦ The corrector can be used on all refractor telescopes with focusers from 2.5" upwards
♦ The corrector provides optimum performance on all refractors between 102 mm and 155 mm aperture
♦ 3-element design with ED special glass
♦ No reflexes due to full multi-coating and internal blackening
♦ Can be used on several telescopes, thanks to the variable distance setting
Setting the correct distance is very easy, as we will show in the following example:
♦ Telescope: refractor with 130 mm aperture f/7, thus 910 mm focal length.
♦ Camera: DSLR with 55 mm distance from the M48 thread to the sensor.
The working distance is 66.17 mm according to the table. From this dimension you simply deduct the 55 mm (distance thread to the sensor). This leaves 11.17 mm.
Simply turn the variable adjustment 11.17 mm outwards, this can be easily adjusted by the distance marking. You are now at the optimum distance and can start taking pictures.
Design: | Corrector and reducer for refractor telescopes |
Telescopic connection: | M63x1 external thread |
Camera connection: | M48x0.75 external thread |
Thread for 2" filter: | M48x0,75 female thread available |
Intermediate thread: | M72x1 female thread on camera adapter |
Overall height of the camera adapter: | 5 mm |
Reduction factor: | 0.8 x |
Lenses: | 3 lenses with ED element |
Coating: | multi-coating and internal blackening |
Working distance: | variable (adjustable) |
Adjustment range of the distance: | 0-13 mm stepless |
Suitable for: | Refractor telescopes from 102 mm to 155 mm aperture with focusers from 2.5" |