William UniGuide 32 mm mini guiding scope with universal finder base, red

William UniGuide 32 mm mini guiding scope with universal finder base, red

Compact 32 mm f/3.75 guidescope with T2 and 1.25" connection - can be mounted on your telescope instead of the viewfinder

Opening 32mm
Focal length 120mm
Weight only 240 grams
Camera-side connection T2 (M42x0.75) and 1.25"
Focus adjustment by turning the lens - with locking ring
Adjustable working distance of 0-25 mm behind the T2 thread - suitable for all common autoguiders
Easy connection to the telescope instead of the viewfinder, suitable for Skywatcher, TS-Optics, GSO, Vixen, Celestron...

William Uniguide mini guider scope for autoguiders and cameras with T2 connection
The compact guide scope fits into standard Vixen-type finder shoes and is therefore very easy to assemble. Remove the viewfinder and attach the mini guidescope to the viewfinder shoe. Alternatively, in the accessories section you will also find matching viewfinder shoes and a double holder, which allow the viewfinder and mini guide scope to be used at the same time. Weighing just 240 grams, the guide scope weighs just a little more than a small 6x30 finder.

Connecting the camera or autoguider is easy. By turning the lens, the focus distance can be adjusted from 0 mm to over 25 mm from the T2 thread. This means you can use many CCD or CMOS cameras with a T2 connection, all autoguiders with 1.25" housings and of course also 1.25" eyepieces. For autoguiders like the ZWO ASI120 Mini, the 1.25" extension that comes with the camera must be used.


Opening: 32mm
Focal length: 120mm
Focusing range: 0 - 25 mm
Connection on the back: 1.25" and T2 (M42x0.75) male thread
Telescope connection: Viewfinder holder for common viewfinder shoes and 1/4" internal thread
Materials: aluminum
Weight: 240 grams


William Mini Guidescope, red